View 2SD2230_1014694.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

'$7$ 6+((7
6,/,&21 75$16,6725
6'
131 6,/,&21 (3,7$;,$/ 75$16,6725 )25 /2:)5(48(1&< 32:(5 $03/,),(56
The 2SD2230 is an element realizing ultra low VCE(sat). This transistor is ideal for muting such as stereo recorders, VCRs, and TVs.
PACKAGE DRAWING (UNIT: mm)
FEATURES
* Low VCE(sat): VCE(sat)1 = 33 mV TYP. @IC = 100 mA, IB = 10 mA VCE(sat)2 = 150 mV TYP. @IC = 500 mA, IB = 20 mA * High hFE and high current
QUALITY GRADES
* Standard Please refer to "Quality Grades on NEC Semiconductor Devices" (Document No. C11531E) published by NEC Corporation to know the specification of quality grade on the devices and its recommended applications.
ABSOLUTE MAXIMUM RATINGS (Ta = 25C)
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Collector current (DC) Total power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO ID(DC) PT Tj Tstg Ratings 16 16 5 500 200 150 -55 to +150 Unit V V V mA mW C C
Electrode connection 1. Emitter (E) 2. Base (B) 3. Collector (C) Marking: D46
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
'RFXPHQW 1R '(-9'6 VW HGLWLRQ 'DWH 3XEOLVKHG $SULO 1 &3. 3ULQWHG LQ -DSDQ
(c)
2002 1998
2SD2230
ELECTRICAL CHARACTERISTICS (Ta = 25C)
Parameter Collector cutoff current Emitter cutoff current DC current gain DC current gain DC base voltage Collector saturation voltage Collector saturation voltage Output capacitance Gain bandwidth product Symbol ICBO IEBO hFE1* hFE2* VBE* VCE(sat)1 VCE(sat)2 Cob fT Conditions VCB = 16 V, IE = 0 VEB = 6.0 V, IC = 0 VCE = 1.0 V, IC = 100 mA VCE = 1.0 V, IC = 500 mA VCE = 1.0 V, IC = 10 mA IC = 100 mA, IB = 10 mA IC = 500 mA, IB = 20 mA VCB = 10 V, IE = 0, f = 1.0 MHz VCE = 1.0 V, IE = -100 mA 50 200 200 550 33 150 700 50 200 15 MIN. TYP. MAX. 100 100 Unit nA nA - - mV mV mV pF MHz
* Pulse test PW 350 s, duty cycle 2%
2
Data Sheet D16153EJ1V0DS
2SD2230
TYPICAL CHARACTERISTICS (Ta = 25C)
Data Sheet D16153EJ1V0DS
3
2SD2230
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact an NEC sales representative.
Surface Mounting Type
For details of the recommended soldering conditions, refer to the document Semiconductor Device Mounting Technology Manual (C10535E).
Soldering Method Soldering Conditions Recommended Condition Symbol IR30-00
Infrared reflow
Package peak temperature: 230C, Time: 30 sec. max. (at 210C or higher), Count: Once, Exposure limit: None*
VPS
Package peak temperature: 215C, Time: 40 sec. max. (at 200C or higher), Count: Once, Exposure limit: None*
VP15-00
Partial heating
Pin temperature: 300C max., Time: 10 sec. max. Exposure limit: None*
O
* After opening the dry pack, store it at 25C or less and 65% RH or less for the allowable storage period. Caution Do not use different soldering methods together (except for partial heating).
4
Data Sheet D16153EJ1V0DS
2SD2230
[MEMO]
Data Sheet D16153EJ1V0DS
5
2DS2230
* The information in this document is current as of July, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of 2SD2230

	To Download 2SD2230 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .